Save the transcript as subtitles too, not just as text

whisper-1's verbose response carries a start and an end for every segment,
and the file tab was reading only the start, to build the [mm:ss] prefix.
Keeping the end as well is all an SRT needs.

The text stays the authority on wording and the segments on timing; they
meet at that prefix, which the cleanup model is already told to leave alone.
So a transcript that went through cleanup still turns into properly timed
subtitles. A line whose stamp matches no segment runs until the next line
starts, a line with no stamp at all joins the cue above it, and an end that
would run into the next cue is trimmed back.

The button is dead until a timestamped run finishes, because without
timestamps there are no segments to time anything with.

README.md

@@ -80,7 +80,8 @@ elapsed time, then the stage it is on. It never takes focus. Pressing
   dictation is not lost, but the indicator turns amber with the reason instead of
   looking like a normal run.
 - **Audio and video files** run through the same models under Settings → Audio
-  file, optionally with `[mm:ss]` timestamps, chunked through ffmpeg when long.
+  file, optionally with `[mm:ss]` timestamps, chunked through ffmpeg when long,
+  and saved as `.txt` or as `.srt` subtitles.
 - **History** of every dictation under Settings → History, with a size limit and
   right-click to delete.
 - **Turkish and English interface**, following the system locale by default.

README.tr.md

@@ -81,7 +81,7 @@ süreyi, ardından hangi aşamada olduğunu gösterir. Odak almaz. Dikte çalı
   normal bir çalışma gibi görünmez.
 - **Ses ve video dosyaları** Ayarlar → Ses dosyası sekmesinde aynı modellerden
   geçer; istersen `[dd:ss]` zaman damgalarıyla, uzun dosyalar ffmpeg ile
-  parçalanarak.
+  parçalanarak, sonuç `.txt` ya da `.srt` altyazı olarak kaydedilerek.
 - **Geçmiş** Ayarlar → Geçmiş sekmesinde; boyut sınırı var, sağ tıklayıp
   silebilirsin.
 - **Türkçe ve İngilizce arayüz**, varsayılan olarak sistem dilini izler.

api.py

@@ -151,7 +151,7 @@ def transcribe(target, wav_path, language="", prompt="", timeout=300):
 
 
 def transcribe_segments(target, wav_path, language="", prompt="", timeout=300):
-    """[(start_seconds, text)] using whisper-1's verbose response."""
+    """[(start_seconds, end_seconds, text)] using whisper-1's verbose response."""
     data = _transcribe_request(
         target._replace(model=timestamp_model(target.provider)),
         wav_path, language, prompt, "verbose_json",
@@ -162,12 +162,14 @@ def transcribe_segments(target, wav_path, language="", prompt="", timeout=300):
     for seg in segments:
         text = (seg.get("text") or "").strip()
         if text:
-            out.append((float(seg.get("start") or 0.0), text))
+            start = float(seg.get("start") or 0.0)
+            end = float(seg.get("end") or 0.0)
+            out.append((start, max(end, start), text))
     if not out:
         text = (data.get("text") or "").strip()
         if not text:
             raise ApiError(t("Transcript came back empty."))
-        out = [(0.0, text)]
+        out = [(0.0, 0.0, text)]
     return out
 
 

filetranscribe.py

@@ -7,6 +7,7 @@ their timestamps shifted into place.
 
 import contextlib
 import os
+import re
 import shutil
 import subprocess
 import tempfile
@@ -21,6 +22,10 @@ from i18n import t
 CHUNK_SECONDS = 600          # 10 min ≈ 19 MB at 16 kHz mono s16
 CLEANUP_CHUNK_CHARS = 12000  # keep each cleanup call comfortably small
 RATE = 16000
+MIN_SUBTITLE_SECONDS = 1.5   # how long a cue with no end time of its own stays up
+
+# The [mm:ss] or [h:mm:ss] prefix a timestamped line starts with.
+STAMP_RE = re.compile(r"^\[(?:(\d+):)?(\d{1,2}):(\d{2})\]\s*")
 
 
 class Cancelled(Exception):
@@ -29,7 +34,7 @@ class Cancelled(Exception):
 
 class FileTranscriber(QObject):
     progress = pyqtSignal(str)
-    finished = pyqtSignal(str)
+    finished = pyqtSignal(str, list)   # text, [(start, end, text)] when timestamped
     failed = pyqtSignal(str)
 
     def __init__(self, conf, parent=None):
@@ -76,22 +81,24 @@ class FileTranscriber(QObject):
 
             target = conf.transcribe_target()
             pieces = []
+            segments = []
             for index, (chunk_path, offset) in enumerate(chunks, start=1):
                 self._check()
                 self.progress.emit(
                     t("Transcribing chunk {index}/{count}…", index=index, count=len(chunks))
                 )
                 if timestamps:
-                    segments = api.transcribe_segments(
+                    segments.extend(
+                        (start + offset, end + offset, line)
+                        for start, end, line in api.transcribe_segments(
                             target,
                             chunk_path,
                             language=conf["language"],
                             prompt=conf["transcribe_prompt"],
                         )
-                    pieces.extend(
-                        f"[{format_timestamp(start + offset)}] {text}"
-                        for start, text in segments
                     )
+                    pieces = [f"[{format_timestamp(start)}] {line}"
+                              for start, _, line in segments]
                 else:
                     pieces.append(api.transcribe(
                         target,
@@ -107,7 +114,7 @@ class FileTranscriber(QObject):
                 self.progress.emit(t("Cleaning up…"))
                 text = self._cleanup(text, timestamps)
 
-            self.finished.emit(text)
+            self.finished.emit(text, segments)
 
         except Cancelled:
             self.progress.emit(t("Stopped."))
@@ -140,6 +147,58 @@ def format_timestamp(seconds):
     return f"{hours}:{minutes:02d}:{secs:02d}" if hours else f"{minutes:02d}:{secs:02d}"
 
 
+def srt_timestamp(seconds):
+    millis = int(round(max(seconds, 0.0) * 1000))
+    hours, rest = divmod(millis, 3600000)
+    minutes, rest = divmod(rest, 60000)
+    secs, millis = divmod(rest, 1000)
+    return f"{hours:02d}:{minutes:02d}:{secs:02d},{millis:03d}"
+
+
+def to_srt(text, segments):
+    """Turn the timestamped transcript into SRT cues.
+
+    The text is the authority on wording, so cleanup edits survive; the segments
+    are the authority on timing. They meet at the [mm:ss] prefix, which cleanup
+    is told to leave alone: a line's whole-second stamp finds the segment it came
+    from, and with it the fractional start and the end time whisper reported. A
+    line whose stamp finds nothing runs until the next line starts.
+    """
+    cues = []
+    for line in text.splitlines():
+        line = line.strip()
+        if not line:
+            continue
+        match = STAMP_RE.match(line)
+        body = line[match.end():].strip() if match else line
+        if not match:
+            if cues and body:      # a wrapped line belongs to the cue above it
+                cues[-1][2] += " " + body
+            continue
+        if not body:
+            continue
+        hours, minutes, secs = (int(g or 0) for g in match.groups())
+        cues.append([hours * 3600 + minutes * 60 + secs, None, body])
+
+    timing = {}
+    for start, end, _ in segments:
+        timing.setdefault(int(start), (start, end))
+    for cue in cues:
+        cue[0], cue[1] = timing.get(cue[0], (float(cue[0]), 0.0))
+    for index, cue in enumerate(cues):
+        following = cues[index + 1][0] if index + 1 < len(cues) else 0.0
+        if following > cue[0]:
+            cue[1] = min(cue[1], following) if cue[1] > cue[0] else following
+        elif cue[1] <= cue[0]:
+            cue[1] = cue[0] + MIN_SUBTITLE_SECONDS
+
+    blocks = [
+        f"{number}\n{srt_timestamp(start)} --> {srt_timestamp(end)}\n{body}"
+        for number, (start, end, body) in enumerate(cues, start=1)
+    ]
+    return "\n\n".join(blocks) + "\n" if blocks else ""
+
+
 def _to_wav(path, workdir):
     out = os.path.join(workdir, "audio.wav")
     res = subprocess.run(

i18n.py

@@ -197,8 +197,15 @@ TR = {
     "Stop": "Durdur",
     "Copy": "Panoya kopyala",
     "Save as .txt": "'.txt' olarak kaydet",
+    "Save as .srt": "'.srt' olarak kaydet",
+    "Subtitles, timed from the segments. Needs the timestamps option.":
+        "Altyazı; zamanlaması bölüm damgalarından gelir. Zaman damgası seçeneği "
+        "işaretliyken çalışır.",
+    "No timestamped lines to turn into subtitles.":
+        "Altyazıya çevrilecek zaman damgalı satır yok.",
     "Save transcript": "Transkripti kaydet",
     "Text files": "Metin dosyaları",
+    "Subtitle files": "Altyazı dosyaları",
     "Converting audio…": "Ses dönüştürülüyor…",
     "Splitting into {count} chunks…": "{count} parçaya bölünüyor…",
     "Transcribing chunk {index}/{count}…": "{index}/{count} parça yazıya çevriliyor…",

settings_ui.py

@@ -15,6 +15,7 @@ from PyQt6.QtWidgets import (
 import api
 import audio
 import config as cfg
+import filetranscribe
 import hotkey
 from filetranscribe import FileTranscriber
 from i18n import t
@@ -315,9 +316,16 @@ class SettingsWindow(QDialog):
         )
         save = QPushButton(t("Save as .txt"))
         save.clicked.connect(self._save_transcript)
+        self.file_save_srt = QPushButton(t("Save as .srt"))
+        self.file_save_srt.setToolTip(
+            t("Subtitles, timed from the segments. Needs the timestamps option.")
+        )
+        self.file_save_srt.setEnabled(False)
+        self.file_save_srt.clicked.connect(self._save_subtitles)
         out_row = QHBoxLayout()
         out_row.addWidget(copy)
         out_row.addWidget(save)
+        out_row.addWidget(self.file_save_srt)
         out_row.addStretch(1)
         layout.addLayout(out_row)
         return page
@@ -642,6 +650,8 @@ class SettingsWindow(QDialog):
         if not getattr(self, "file_path", "") or self.transcriber.busy:
             return
         self.file_output.clear()
+        self.file_segments = []
+        self.file_save_srt.setEnabled(False)
         self.file_run.setEnabled(False)
         self.file_stop.setEnabled(True)
         self.transcriber.start(
@@ -655,8 +665,10 @@ class SettingsWindow(QDialog):
         if message == t("Stopped."):
             self._file_idle()
 
-    def _on_file_finished(self, text):
+    def _on_file_finished(self, text, segments):
         self.file_output.setPlainText(text)
+        self.file_segments = segments
+        self.file_save_srt.setEnabled(bool(segments))
         self.file_status.setText(t("Done: {chars} characters.", chars=len(text)))
         self._file_idle()
 
@@ -669,17 +681,30 @@ class SettingsWindow(QDialog):
         self.file_stop.setEnabled(False)
 
     def _save_transcript(self):
-        text = self.file_output.toPlainText()
+        self._write_transcript(self.file_output.toPlainText(), ".txt",
+                               f"{t('Text files')} (*.txt)")
+
+    def _save_subtitles(self):
+        srt = filetranscribe.to_srt(self.file_output.toPlainText(),
+                                    getattr(self, "file_segments", []))
+        if not srt:
+            self.file_status.setText(t("No timestamped lines to turn into subtitles."))
+            return
+        self._write_transcript(srt, ".srt", f"{t('Subtitle files')} (*.srt)")
+
+    def _write_transcript(self, text, suffix, file_filter):
         if not text:
             return
         base = os.path.splitext(os.path.basename(getattr(self, "file_path", "")))[0]
         start = os.path.join(self.conf["file_last_dir"] or os.path.expanduser("~"),
-                             f"{base or 'transcript'}.txt")
+                             f"{base or 'transcript'}{suffix}")
         path, _ = QFileDialog.getSaveFileName(
-            self, t("Save transcript"), start, f"{t('Text files')} (*.txt)"
+            self, t("Save transcript"), start, file_filter
         )
         if not path:
             return
+        if not path.lower().endswith(suffix):
+            path += suffix
         try:
             with open(path, "w", encoding="utf-8") as fh:
                 fh.write(text)